Free Standards Library

BS ISO 556:2020 pdf download – Coke (greater than 20 mm in size) — Determination of mechanical strength

BS ISO 556:2020 pdf download - Coke (greater than 20 mm in size) — Determination of mechanical strength. 5.2 Tray, >1 000 mm × >900 mm × 200 mm deep, constructed from a suitable abrasion-resistant and wear-resistant...

02-21

Download Now

BS ISO 516:2019 pdf download – Camera shutters一Timing – General definition and mechanical shutter measurements

BS ISO 516:2019 pdf download - Camera shutters一Timing - General definition and mechanical shutter measurements. 1 Scope This document provides a uniform basis for determining the exposure times for all types of shutters used in still cameras...

02-21

Download Now

BS EN ISO 16946:2015 pdf download – Non-destructive testing — Ultrasonic testing — Specification for step wedge calibration block

BS EN ISO 16946:2015 pdf download - Non-destructive testing — Ultrasonic testing — Specification for step wedge calibration block. 1 Scope This International Standard specifies the dimensions, material, and manufacture of a step wedge steel block for...

02-21

Download Now

BS EN ISO 16672:2015 pdf download – Ophthalmic implants — Ocular endotamponades (ISO 16672:2015)

BS EN ISO 16672:2015 pdf download - Ophthalmic implants — Ocular endotamponades (ISO 16672:2015). 5.4 Concentration of the components The concentration of each component material in the finished product shall be stated. Since the testing methodology can...

02-21

Download Now

BS EN ISO 2746:2015 pdf download – Vitreous and porcelain enamels — High voltage test

BS EN ISO 2746:2015 pdf download - Vitreous and porcelain enamels — High voltage test. 4 Principle A high voltage electrode is passed over the enamel surface. Defects (Test A) or defects and weak spots (Test B)...

02-21

Download Now

ANSI/ AAMI/ISO 18472:2006 pdf download – Sterilization of health care products — Biological and chemical indicators — Test equipment

ANSI/ AAMI/ISO 18472:2006 pdf download - Sterilization of health care products — Biological and chemical indicators — Test equipment. 1 Scope 1.1 This International Standard specifies the requirements for test equipment to be used to test chemical...

02-21

Download Now

ANSI/AAMI/ ISO 14708-5: 2010 pdf download – Implants for surgery — Active implantable medical devices — Part 5: Circulatory support devices

ANSI/AAMI/ ISO 14708-5: 2010 pdf download - Implants for surgery — Active implantable medical devices — Part 5: Circulatory support devices. 6 Requirements for particular active implantable medical devices Addition 6.101 Intended clinical use/indications The intended use...

02-21

Download Now

ANSI/AAMI/ ISO 8638:2015 pdf download – Cardiovascular implants and extracorporeal systems — Extracorporeal blood circuit for hemodialyzers, hemodiaflters and hemoflters

ANSI/AAMI/ ISO 8638:2015 pdf download - Cardiovascular implants and extracorporeal systems — Extracorporeal blood circuit for hemodialyzers, hemodiaflters and hemoflters. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1...

02-21

Download Now

ANSI/AAMI/ ISO 5840-2:2015 pdf download – Cardiovascular implants— Cardiac valve prostheses— Part 2: Surgically implanted heart valve substitutes

ANSI/AAMI/ ISO 5840-2:2015 pdf download - Cardiovascular implants— Cardiac valve prostheses— Part 2: Surgically implanted heart valve substitutes. 5 Fundamental requirements The manufacturer shall determine, at all stages of the product life cycle, the acceptability of the...

02-21

Download Now

ANSI/AAMI/ ISO 5840-1:2015 pdf download – Cardiovascular implants— Cardiac valve prostheses— Part 1: General requirements

ANSI/AAMI/ ISO 5840-1:2015 pdf download - Cardiovascular implants— Cardiac valve prostheses— Part 1: General requirements. 6.2.2 Performance specifications The manufacturer shall establish (define, document, and implement) the clinical performance requirements of the device and the corresponding device...

02-21

Download Now