IEEE Std 1547a-2020 pdf download – IEEE Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces Amendment 1: To Provide More Flexibility for Adoption of Abnormal Operating Performance Category III.
NOTE—The editing instructions contained in this amendment define how to merge the material contained therein into the existing base standard and its amendments to form the comprehensive standard. The editing instructions are shown in bold italic. Four editing instructions are used: change, delete, insert, and replace. Change is used to make corrections in existing text or tables. The editing instruction specifies the location of the change and describes what is being changed by using strikethrough (to remove old material) and underscore (to add new material). Delete removes existing material. Insert adds new material without disturbing the existing material. Insertions may require renumbering. If so, renumbering instructions are given in the editing instruction. Replace is used to make changes in figures or equations by removing the existing figure or equation and replacing it with a new one. Editing instructions, change markings, and this NOTE will not be carried over into future editions because the changes will be incorporated into the base standard.
[B1] A. Levitt, “Implementing Ride Through from Distributed Energy Resources.,” Presentation at PJM DER Ride Through Task Force. PJM Interconnection., 2019. [Online]. Available: Available online at https://pjm.com/-/media/committees-groups/task-forces/derrttf/20190730-workshop/20197030-item-18- implementing-ride-through-from-distributed-energy-resources.ashx. [B2] Electric Power Research Institute (EPRI), “Recommended Settings for Voltage and Frequency Ride- Through of Distributed Energy Resources. Minimum and Advanced Requirements and Settings for the Performance of Distributed Energy Resources During and After System Disturbances to Support Bulk Power Syst,” 3002006203, 2015. [Online]. Available: https://www.epri.com/#/pages/product/000000003002006203/. [B3] EPRI, “DER Modeling Guidelines for Transmission Planning Studies: 2018 Summary. Technical Update. 3002013503.,” [Online]. Available: https://www.epri.com/#/pages/product/000000003002013503/. [B4] EPRI, “Transmission and Distribution Operations and Planning Coordination. TSO/DSO and Tx/Dx Planning Interaction, Processes, and Data Exchange,” 3002016712, [Online]. Available: https://www.epri.com/#/pages/product/000000003002016712/. [B5] EPRI, “Understanding Smart Inverter Functions’ Impact on Islanding Detection. Technical Update. 3002012986,” December 2018. [Online]. Available: https://www.epri.com/#/pages/product/000000003002012986/. [B6] MISO, “IEEE 1547Distribution Interconnection Coordination,” [Online]. Available: https://www.misoenergy.org/planning/generator-interconnection/ieee-1547/. [B7] MA TSRG, “Massachusetts Technical Standards Review Group,” [Online]. Available: https://sites.google.com/site/massdgic/home/interconnection/technical-standards-review-group. [B8] PJM Interconnection, “DER Ride Through Task Force,” [Online]. Available: https://www.pjm.com/committees-and-groups/task-forces/derrttf.aspx. [B9] PJM, “PJM Interconnection (Q4 2019): PJM Guideline for Ride Through Performance of Distribution-Connected Generators,”